Subaru EndWrench Summer 1998
In this issue: Subaru OBD Systems; Subaru Electrical Connector Handling and Terminal Sliding Resistance Measurement; Subaru Ignition Coil Testing
Read MoreJul 1998 | Subaru, Subaru EndWrench Issues
In this issue: Subaru OBD Systems; Subaru Electrical Connector Handling and Terminal Sliding Resistance Measurement; Subaru Ignition Coil Testing
Read MoreApr 1998 | Subaru, Subaru EndWrench Issues
In this issue: Subaru 2.2 Liter Engine; Avoid Potential Subaru AWD Transmission Damage; De-Powered Subaru Air Bags Bulletin
Read MoreApr 1998 | Subaru, Subaru EndWrench Features
The automotive industry has been directed by the Federal Government to have “DE-POWERED” AIR BAGS installed in 1998 model year vehicles.
Read MoreApr 1998 | Subaru, Subaru EndWrench Features
Subaru Full-Time 4WD and AWD equipped vehicles should never be tested on a single two-wheel dynamometer.
Read MoreApr 1998 | Subaru, Subaru EndWrench Features
Introducing the Subaru 2.2 liter naturally aspirated (N/A) and 2.2 liter turbocharged horizontally opposed overhead cam (OHC) engines.
Read MoreFeb 1998 | Subaru, Subaru EndWrench Issues
In this issue: Subaru 4EAT Transmissions; Subaru 4EAT Modifications; 4EAT FWD and AWD Brake Band Adjustment
Read MoreFeb 1998 | Subaru, Subaru EndWrench Features
When installing or replacing the reduction gears or transfer gears in a 4EAT, the phase matching...
Read MoreFeb 1998 | Subaru, Subaru EndWrench Features
Should it become necessary to remove and install the speedometer cable adapter from the...
Read MoreJan 1998 | Subaru, Subaru EndWrench Features
The following procedure describes access to the 4EAT transmission brake band adjustment for 1990-92 Legacy and SVX models. Refer to the applicable service manual for brake band diagnosis, adjustment specifications and proper...
Read More